Magic Shine Top Coat for chromes and pigments 15ml

This top gel is to accentuate your pigments, a magical shine and the perfect protection.

Viscosity:
The Magic Shine has a medium viscosity and comes in a bottle with a brush, so you can apply the gel with ease.
Curing:
The curing time for this top depends on the effect you want to achieve with pigments, chromes etc.
when you want to rub in your pigments for an overall smooth, shiny effect then you have to shorten the curing time.
In general the guidelines is 50% of the total curing time (1 minute in LED and 2min in UV lamp)
If the lamp is new then the curing time is even shorter, sometimes even 3 seconds will do. Always test to see which curing time is ideal for your lamp.
Adhesion:
Magic Shine is a top gel that after cuing it for 50% of the curing time , you can rub in (press in) a pigment (chrom powder etc.) with an applicator of your choice. Then remove the excess of the pigment with a soft brush and cure for the remaining curing time. This will ensure the pigment will stay in the gel. Next apply one more layer of Magic shine and cure for full curing time. This will protect the pigment and give a beautiful shine.
Flexibility:
Magic shine has an average flexibility.
Always apply thin !
UV Filter:
Magic Shine has a normal UV filter and protects the colours from fading.
Problems and causes:
If you cannot correctly rub the pigment into the Magic Shine, then you probably have cured the gel for too long.
This makes the gel non-porous and the pigment cannot be absorbed correctly.
Don’t brush in too much pigment. If you are not sure, apply a bot of Soft bond primer to prevent breakages.